Commissioning; Manual Selection Of The Video1 Or Video2 Input; Settings - Extel WESV 87052 Instrucciones De Uso

d. Commissioning
Connect the 12 V output of the adapter to the monitor output black plug
Connect the mains adapter to a 230 V outlet.
To use your WESV 87053, it is recommended to use the remote control unit which includes more functions than
the monitor.
Press the On/Off button: « » of the remote control unit , POWER on the monitor.
e. Manual selection of the VIDEO 1 and VIDEO 2 input
Use the "AV" key of the remote control unit or the monitor to select the Video 1 or Video 2 mode of the monitor
to watch the camera, according to the AV1 or AV2 input used (10 or 12 page 6)
f. Settings
For setting the volume, use directly the & keys on the monitor or VOL + VOL - of the remote control unit.
To access the different settings press the "MENU" key of the remote control unit or the monitor.
Use the Vol+ and Vol– key of the remote control unit and the & keys of the monitor to modify the para-
meters.
Use the arrow keys to go up or down.
The settings disappear after a few seconds of inactivity.
« BRIGHTESS »: the brightness of the image, if the image is too bright or too dark, set the brightness.
« CONTRAST » : contrast of the image, an image too contrasted can be harmful for the sight and mark the screen.
« COLOUR » : colour adjustment.
« NEATNESS » : Improve the quality of the image.
Press twice the MENU key (remote control unit and monitor)
11 selectable languages
Games and Agenda: Not used
Use the Vol+ and Vol– key of the remote control unit and the & keys of the monitor to modify the para-
meters.
Use the arrow keys to go up or down.
The settings disappear after a few seconds of inactivity.
CFI EXTEL WESV 87052 - 05/2012 - V1
GB7