Maintenance; Cleaning Pad; Fan, Sensors And Squeegee - ECOVACS ROBOTICS WINBOT 950 Manual De Instrucciones

Before performing cleaning and maintenance on WINBOT, Power OFF and unplug WINBOT from
the receptacle.

4.1 Cleaning Pad

Turn WINBOT over and remove the Cleaning
Pad. Soak the Cleaning Pad in cool, clean
water for 2 minutes. Hand wash with mild
detergent and lay flat to dry. Allow it to dry
completely before re-attaching it to WINBOT.
* Do NOT use a wet Cleaning Pad on WINBOT or it may slip on the window.
* Washing the Cleaning Pad regularly can extend its service life.
* If the Cleaning Pad becomes worn or no longer fits exactly within the Velcro area, replace it with a
new one to achieve best cleaning performance.

4.2 Fan, Sensors and Squeegee

Fan
Turn WINBOT over and wipe any debris from
the Fan with the provided Finishing Cloth to
maintain suction.

4. Maintenance

Side Rollers
Wipe the four Side Rollers with the provided
Finishing Cloth to maintain their effectiveness.
15
EN